|
|
The table below shows the available SLSM 4 Phase configurations in HD with an XT3 4U server.
A separate channel is used for each phase. The table shows how the BNC connectors should be assigned on the rear panel, which corresponds to the channel assignment at the level of the codec module of the V3X board.
| IN4/OUT1 | IN3/OUT2 | IN2/OUT3 | IN1/OUT4 | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
#REC SLSM 4x |
#REC | #PLAY |
Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. |
|
4-Channel Mode |
||||||||||
|
1 |
0 |
0 |
REC1,4 |
|
REC1,3 |
|
REC1,2 |
|
REC1,1 |
|
|
XRec Mode |
||||||||||
|
1 |
0 |
1 |
PLAY1 |
MIX1 |
REC1,3 |
|
REC1,2 |
|
REC1,1 |
REC1,4 |
|
1 |
1 |
1 |
PLAY1 |
MIX1 |
REC1,3 |
|
REC1,2 |
REC2 |
REC1,1 |
REC1,4 |
|
1 |
0 |
2 |
PLAY1 |
MIX1 |
PLAY2 |
MIX2 |
REC1,2 |
REC1,4 |
REC1,1 |
REC1,3 |
| Reference Manual Multicam 14.01 Supported Configurations | Issue 14.01.A - November 2015 |
