|
|
The table below shows the available 4K SLSM 2 Phase configurations with an XT3 4U server.
A separate physical connector is used for each phase. The table shows how the BNC connectors should be assigned on the rear panel. This corresponds to the channel assignment at the level of the codec module of the V3X board:
|
#REC SLSM 2x |
#REC | #PLAY | IN6/OUT1 | IN5/OUT2 | IN4/OUT3 | IN3/OUT4 | IN2/OUT5 | IN1/OUT6 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. | |||
|
1 |
0 |
1 |
PLAY 1TL |
PLAY 1BL |
PLAY 1TR |
PLAY 1BR |
REC 1,1BR |
REC 1,2BR |
REC 1,1BL |
REC 1,2BL |
REC 1,1TR |
REC 1,2TR |
REC 1,1TL |
REC 1,2TL |
| Reference Manual Multicam 15.00 Supported Configurations | Issue 15.00.A - July 2016 |
