|
|
The table below shows the available U-Motion 10 Phase configurations in HD with an XT3 6U server.
A separate channel is used for each phase. The table shows how the BNC connectors should be assigned on the rear panel, which corresponds to the channel assignment at the level of the codec module of the V3X board.
| IN6/OUT1 | IN5/OUT2 | IN4/OUT3 | IN3/OUT4 | IN2/OUT5 | IN1/OUT6 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
#REC SLSM 10x |
#REC | #PLAY | Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. | Prim. Ch. | Sec. Ch. |
|
XRec Mode |
||||||||||||||
|
1 |
0 |
1 |
PLAY 1 |
|
REC 1,5 |
REC 1,10 |
REC 1,4 |
REC 1,9 |
REC 1,3 |
REC 1,8 |
REC 1,2 |
REC 1,7 |
REC 1,1 |
REC 1,6 |
| Reference Manual Multicam 15.00 Supported Configurations | Issue 15.00.A - July 2016 |
