Infrastructure Settings

This setting specifies the IP Address of the EVS video server to be controlled by LSM-VIA.

Description

Up to 4 operators may work independently on the same server from their respective LSM-VIA workstation and remote panel (multi-operator mode).

This setting is used to set the number of operators working with the same EVS server. It must be the same on each workstation.

Then, each operator must select his/her operator number thanks to the Operator Position parameter.

See also section Multi-Operator Mode.

Possible Values

From 1 to 4.

Default value

1

Description

When more than 1 operator has been set from the Total Number of LSM-VIA Connected to the Server parameter (multi-operator mode), this setting is used to select the operator number on each workstation. It must therefore be different on each workstation.

See also section Multi-Operator Mode.

Channels distribution:

The number of available players on the server is divided by the number of operators. If there are more players than operators, the first operator(s) get(s) more players.

The first operator receives the first player(s).

• Example with 4 operators in a 8IN/4OUT configuration: PGM1 is for Operator 1, PGM2 for Operator 2,...
• Example with 4 operators in a 6IN/6OUT configuration: PGM1 and PGM2 are for Operator 1, PGM3 and PGM4 are for Operator 2, PGM5 is for Operator 3 and PGM6 is for Operator 4.
• Example with 3 operators in a 6IN/6OUT configuration: PGM1 and PGM2 are for Operator 1, PGM3 and PGM4 are for Operator 2, PGM5 and PGM6 are for Operator 3.

The selection of recorders per operator is done with the Operator Recorders parameter.

The remote buttons will automatically be mapped appropriately.

Possible Values

Operator 1, Operator 2, Operator 3, Operator 4.

Default value

Operator 1.

Description

Allows to select the recorder channels the selected operator will be able to work with.

Possible Values

Recorder labels from A to L.

Click the recorder buttons to select (highlight) the corresponding recorder channels.

The same recorders can be selected by several operators.

The remote buttons will automatically be mapped appropriately.

Default value

No recorder selected.

This setting specifies the IP Address of the machine hosting the Xsquare to be used for export purposes.

This field is used to enter the login of the VIA Xsquare user.

This field is used to enter the password of the VIA Xsquare user.

This button is used to check the connection withVIA Xsquare.

The result will be displayed in one of the following ways:

or

Description

Allows the use of Dyvi macros from the Remote Panel.

The Dyvi macros, if appropriately configured, will be available as functions to be mapped to Remote Shortcut buttons/keys. So, the operator will be able to trigger the Dyvi macros from the Remote Panel console or touchscreen. Up to 6 Dyvi macros can be used from LSM-VIA.

Possible Values
• No (cleared) means that the Dyvi macros will not be available from LSM-VIA.
• Yes (selected) means that the DyviI macros will be available for mapping to Remote Shortcut buttons/keys.

Default value

No (cleared)

This setting specifies the IP Address of the Dyvi switcher to be connected to LSM-VIA.

It is only displayed when the Enable Dyvi Macros parameter has been selected.