System Settings


Context |
When creating clips, the clip corresponding to the camera on which IN/OUT points have been marked is always saved. It is possible to do automatically the same action on the other cameras.
|
||
Description |
Specifies that clips have to be created on the enabled cameras even if no IN or OUT point has been marked on that camera. |
||
Possible Values |
Camera labels from A to L. Click the camera buttons to select (highlight) the corresponding cameras. |
||
Default value |
All cameras selected (highlighted). |

Description |
Specifies the duration of clip guardbands in seconds. This represents the additional material that should be added before the IN point and after the OUT point for preroll and postroll. |
Possible Values |
From 0s to 60s |
Default value |
5s |

Description |
Specifies the duration of clips created with only one reference point (IN or OUT point). |
Possible Values |
From 0s (=inactive) to 14400s (240min) |
Default value |
4s |

Description |
Specifies the duration of the Post Roll. When the Post Roll function is activated from the Live screen or Clip screen, the playout will continue for the duration defined by the Post Roll Duration parameter
|
||||||
Possible Values |
From 00s00fr to 600s00fr |
||||||
Default value |
02s00fr |

Description |
If this function is enabled, the value of the selected field will automatically be used to name the clip upon creation. |
|||||||||||||||
Possible Values |
No name is assigned to the clip when it is created.
The timecode of the IN point of the clip is used as clip name when the clip is created.
The name of the record channel is used as clip name when the clip is created.
The ID Louth (UmID) of the clip, i.e. the unique identifier for the clip on the XNet network, is used as clip name when the clip is created.
The VarID of the clip is used as clip name when the clip is created. Actually, the clip name will be limited to the first 8 characters of the VarID. |
|||||||||||||||
Default value |
Disabled |

Description |
Defines how a mark point will be set. |
||||||
Possible Values |
|
||||||
Default value |
Live |
This default setting is only taken into account at startup of LSM-VIA. It is independent of the Mark Live / Playback setting available from the Live screen and the Clip screen of the Remote and any change of the Mark Live / Playback setting will have no impact on the default setting. |

Description |
Specifies whether Multicam will freeze or not when it reaches a mark point set on the clip and/or the record train that is being played back. |
||||||
Possible Values |
|
||||||
Default value |
No (cleared) |
This default setting is only taken into account at startup of LSM-VIA. It is independent of the Freeze on Marks setting available from the Live screen and the Clip screen of the Remote and any change of the Freeze on Marks setting will have no impact on the default setting. |

Description |
Defines the behavior of the Loop function when the Loop mode is activated. |
||||||
Possible Values |
|
||||||
Default value |
Loop |


Description |
Defines the default speed value that the playlist elements will have when added to a playlist. |
||||||||||||||||||
Possible Values |
To set a custom speed:
An additional field appears.
|
||||||||||||||||||
Default value |
100 % |

Description |
Sets the duration of video transition effect. The specified value is used as default value in the Playlist Edit mode.
|
||
Possible Values |
From 0 fr to 600 fr |
||
Default value |
0 fr |

Availability |
This setting is only available if the license code 112 is valid. |
||||||
Description |
Gives access to advanced audio settings, such as audio split, audio swap. |
||||||
Possible Values |
|
||||||
Default value |
No (cleared) |

Availability |
This setting is only available if the license code 112 is valid. |
Description |
Sets the duration of audio transition effect. The specified value is used as default value when a clip is added to a playlist in Playlist Edit mode. |
Possible Values |
From 0 fr to 600 fr (20 sec in NTSC) |
Default value |
0 fr |

Description |
Defines the color displayed during the fade transition effects. |
Possible Values |
Black, White |
Default value |
Black |

Description |
Defines the direction of a wipe transition effect: from right to left or from left to right. |
Possible Values |
Vert. L>R, Vert. R>L |
Default value |
Vert. L>R |

Description |
Specifies if the clips added to a playlist are inserted before or after the active clip in the playlist. |
Possible Values |
Before, After |
Default value |
Before |

Description |
Defines whether an SLSM clip inserted into a playlist will automatically be set to be played out at its native speed, or at the value defined in the Default Playlist Speed parameter. |
||||||
Possible Values |
|
||||||
Default value |
No (cleared) |

Description |
Determine the way a playlist will be loaded. |
||||||
Possible Values |
It allows loading and playing multiple playlists using a single Remote Panel. |
||||||
Default value |
Always |
This default setting is only taken into account at startup of LSM-VIA. It is independent of the Always / Conditional setting available from the Live screen and the Clip screen of the Remote and any change of the Always / Conditional setting will have no impact on the default setting. |

Description |
Specifies to which audio outputs the auxiliary track of the playlist will be played out. |
|||||||||
Possible Values |
The following values are possible:
The auxiliary track will use the audio outputs normally assigned to the PRV channel. If no PRV channel is available, the Aux Track will not be assigned to any audio output.
The auxiliary track will use the audio outputs normally assigned to the PRV channel if there is one, plus all the audio outputs from 7-8/15-16 that have not yet been assigned to another channel. Use this option if you need an auxiliary track without PRV channel available.
The auxiliary track will use the audio outputs normally assigned to the PGM channel. |
|||||||||
Default value |
PRV |


Description |
Specifies whether the local workstation works with a keyword file stored locally or on another LSM-VIA workstation of the network. |
Possible Values |
Local, Network |
Default value |
Local |

This field gives the path to and name of the local keyword file used to manage clip keywords.

This setting specifies the IP Address of the LSM-VIA workstation hosting the keyword file when the Network Keyword File mode has been selected.


Description |
Specifies the duration of the Take effect (swap between the media loaded on the PGM1 and the PGM2 or the PGM and the PRV). |
Possible Values |
From 0 to 600 frames |
Default value |
10 frames |

Description |
Specifies how many times faster than the standard jog speed the loaded media is browsed when enabling the Fast Jog function on the Remote Panel. |
Possible Values |
From 1x to 20x (integer numbers) |
Default value |
20x |

Description |
Specifies the default mode to control the channels of the EVS server. |
Possible Values |
Multi-PGM, PGM+PRV |
Default value |
Multi-PGM |
This default setting is only taken into account at startup of LSM-VIA. It is independent of the PGM+PRV / Multi PGM setting available from the Live screen and the Clip screen of the Remote and any change of the PGM+PRV / Multi PGM setting will have no impact on the default setting. |

Description |
Enables/disables the selection of the camera of a clip through the Function keys: pressing several times the Function key of the clip position calls successively the various camera angles of the clip. |
Possible Values |
ON, OFF |
Default value |
ON |

Context |
The lever can be used in normal mode to play back clips at slow motion speed from 0 to 100%. A secondary range is available to playback material at other speed ranges. To gain access to the secondary speed from the remote panel console, press SHIFT + 2nd Lever/TAKE. The second lever range is also available when editing the speed of playlist elements. |
||||||||||||||||||
Description |
Specifies the secondary speed range on the Remote Panel. |
||||||||||||||||||
Possible Values |
|
||||||||||||||||||
Default value |
-100% → +100% |

Context |
During playback, if PGM Speed or Var Max has been activated, the lever range will be adapted so that:
OR
|
||||||
Description |
Specifies the playback speed assigned to the lever when the PGM Speed mode is activated, or the speed range when the Var Max mode is activated. |
||||||
Possible Values |
Range of values from 1 to 400 % |
||||||
Default value |
50% |

Description |
Enables/disables the display of the notifications as pop-up for the Info and the Success categories on the LSM-VIA Viewer and on the Remote Panel touchscreen. Notifications for Error and Warning are displayed in any case.
|
||
Possible Values |
Disabled, Enabled |
||
Default value |
Disabled |


Description |
Enables/disables the Search services and specifies where they are deployed. |
|||||||||
Possible Values |
|
|||||||||
Default value |
Local |

This setting specifies the IP Address of the network LSM-VIA workstation where the VIA Search services are installed.
It is used when the Network option has been selected.