Commands in the Main Menu

Purpose of the Main Menu

The main menu is the Remote Panel menu from which you can perform the following actions:

• Changing the current channel control mode
• Adding a log point in the logs
• Restarting the LSM-VIA application

How to Access the Main Menu

To access the main menu from the Remote Panel console, press + .

The main menu is displayed on the touchscreen:

The following options are displayed on the console:

Possible Actions

Command

Action

Console Key

Touchscreen Button

Remote 1

Associates a single remote panel to the EVS video server.

Restart

Quits the LSM-VIA application and opens the Network Configuration screen from which you can start the application.

See section "How to Quit LSM-VIA on the Remote Panel".

Opens the Clear Clips and Playlists screen which allows you to

• Clear all unprotected clips
• Clear all unprotected playlists
• Clear all unprotected clips and playlists
 

This command is not similar to the Clear Video Disks from the Maintenance menu. If you wish to refresh completely the server, i.e. to clear all clips including the protected ones, you need to use Clear Video Disks rather than Clear clips.

Stops the recording process for all record trains of the local XT-VIA server.

As soon as one of the local record trains is stopped, the F8 function key can be used to restart the recording.

↔

PGM + PRV

Sets the channel control mode to PGM+PRV.

See section "Selecting the Channel Control Mode".

Multi PGM

Sets the channel control mode to Multi PGM.

See section "Selecting the Channel Control Mode".

Log Point

Sets a log point in the logs to ease further log analysis in case an issue has to be investigated.

See section "How to Define a Reference Point for Logs".

Sets the channel control mode to vertical Split Screen.

See section "Split Screen Mode".

+

Sets the channel control mode to horizontal Split Screen.

See section "Split Screen Mode".

+

Sets the channel control mode to Split Screen Mix.

See section "Split Screen Mode".

+