Adding Cuts in Playlist Elements

The Add Cut command is used to cut a playlist element in two elements. Actually, it duplicates the playlist element and adjusts the SHORT IN and SHORT OUT points of these new duplicated elements:

•

On both elements, the LSM ID, the name and the guardbands are kept unchanged as in the original one.

•

In the first duplicated element, the SHORT IN point is left unchanged while the SHORT OUT point is adjusted to the cut point.

•

In the second duplicated element, the SHORT OUT point is left unchanged while the SHORT IN point is adjusted to the cut point as illustrated hereunder.

•

The transition applied at the cut point is a Mix of 0 frame for both audio and video.

The Add Cut command is available from the Remote Panel.

The Add Cut operation is not possible in the following cases:

•

within a video effect.

•

within an audio effect beginning or finishing the original element.