Browsing a Playlist

When the playlist is loaded, you can browse it as follows:

• Browse through the playlist items with the jog.

If the playlist was in Playout mode, the Playlist Edit mode is enabled.

The playlist element being browsed is displayed on a blue background on the Remote Panel touchscreen.

 

You can use the jog in association with the Fast Jog option to multiply the browsing speed up to 20x. See section Fast Jog.

The Browse function is only available when a playlist is loaded.

1. Press Browse .

If the playlist was in Playout mode, it is paused.

The Browse mode is enabled: .

2. Browse through the playlist with the jog to jump from the TC IN of a playlist element to the TC IN of the next playlist element.

If the playlist was in Playout mode, the Playlist Edit mode is enabled.

The Browse function can be disabled in one of the following ways:

• press Browse again
• press E/E or Return
• press Play
• use the lever

When you have loaded a playlist, you can easily move to the IN / OUT points of the current playlist element.

To...

press...

load the frame matching the IN point

+ 

load the frame before the OUT point

+ 

The playlist switches to Edit mode if it was in Playout mode.

When you are browsing a playlist element, you can load back the record train at a given timecode of the playlist element if that timecode is still available in the record train.

1. In the playlist element, jog to the timecode you want to find back in the record train.

2. Use the Return function to load the record train at the same timecode: + .