Default Value
By default, when an element is added to a playlist, the playlist element speed is set to 100%.
The default playlist element speed can be edited from the LSM-VIA configuration tool
Afterwards, the playlist element speed can be individually edited from the Remote Panel or the Viewer as described hereafter.
Limitation
When an audio split has been set on the transition before and/or after the playlist element, the Unknown and the 0% speed values are not available from the lever.
How to Edit the Playlist Element Speed from the Remote Panel
To edit the speed of one or several playlist elements,
| 1. | Load the playlist by pressing  . |
See also section Loading a Playlist.
| 2. | Browse to the playlist element:  . |
The Playlist Edit mode is enabled.
See also section Browsing a Playlist.
| 3. | Enter the Edit Speed mode by pressing  . |
| 4. | (optional) If you need to access the secondary lever range, press  + . Only the positive speed values are available. |
| 5. | Change the speed by using the lever:  or  . |
| 6. | (optional) Repeat steps 2 to 4 for other playlist elements. |
| 7. | Confirm the operation and exit the Edit Speed mode by pressing or by pressing  . |
|
You can also edit the speed of all the playlist elements at once by pressing |
before entering the Speed mode (How to Edit the Playlist Element Speed from the Viewer
To edit the speed of a playlist element,
| 1. | Click in the Speed field of the element:  . |
| 2. | Enter a value for playlist element speed, e.g.  . |
Possibles values are:
| ◦ | from 0 to 400% |
| ◦ | Unknown |
How to Edit the Speed of Several Playlist Elements at Once from the Viewer
| 1. | Select the playlist element(s) in the Playlist pane. |
The number of selected items is displayed at the bottom of the pane.
| 2. | Click in the Speed field:  . |
| 3. | Enter a value for playlist element speed, e.g.  . |
Possibles values are:
| ◦ | from 0 to 400% |
| ◦ | Unknown |