Making Remote Clips Automatically Local
Principles
| • | When the prerequisites are met, remote clips can be made automatically local in the following cases: |
| ◦ | When remote clips are added to a loaded local playlist, the remote clips are automatically copied locally. |
| ◦ | When a local playlist containing remote clips is being loaded, remote clips are automatically copied locally. |
| • | The remote clips are copied locally on the server page set as Protocol Receive Page on Multicam side. |
| • | Remote clips added to a local playlist which is not loaded are not copied yet. |
| • | No local copy occur when a remote playlist is loaded. |
Prerequisite
| • | The Make Local Auto Multicam parameter must have been set to Yes on the XT-VIA Server side. |
Making Remote Clips Manually Local
Principles
A Make Local function is available from the Remote Panel console when a local playlist is loaded in Playlist Edit mode and contains remote clips.
| • | The remote clips are copied locally on the server page set as Protocol Receive Page on Multicam side. |
| • | Remote clips added to the playlist while it is loaded, those clips are not automatically copied locally. The Make Local operation must be repeated. |
| • | Remote clips added to a local active playlist which is not loaded are not copied. |
| • | A remote clip inserted several times in a playlist will be copied locally only once and will refer the same local LSM ID. |
How to Make Remote Clips Manually Local
| • | Press Make Loc  |
During the Make Local process, the Make Loc key display has a blinking yellow background.
Once the process ends, the Make Loc function is no more available as there is no more remote clip.