Creating Audio Template

About Audio Templates

Audio templates can be configured to associate a specific audio preset with a certain type of media. When the template is enabled, the relevant preset will automatically define which audio channels are used for playout and at which level for the given media type. For more information on audio presets, see section Audio Presets.

1. From the vertical Settings menu , select the Templates tab, then open the Audio Preset Templates window.
2. From the Content Type drop-down list, select the content to be played out with a preset.

3. Select the preset from the Preset drop-down list.
4. Click or tap the Enable button and confirm with OK.

From now on, whenever this media type is played, the audio preset configuration will be applied to the audio outputs.

By default, when you create a new audio preset template it is not activated. To activate the audio preset template, select the Enable switch.

To disable an audio preset template, deselect the Enable switch.

1. Make sure the audio preset template is disabled.
2. Tap the More button and select Clear from the menu.

The content type, along with the selected preset, will be cleared from the template.

 

NOTE

You cannot clear an audio preset template when it is enabled.
1. Make sure the audio preset template is disabled.
2. Tap the More button and select Delete from the menu.

The audio template is removed from the Audio Preset Templates window.

 

NOTE

If you attempt to delete a preset that is used in an audio template, an error message similar to the following is displayed:

The preset has to be removed from the template.