Beplay Remote Controls

Layout and Default Button Configuration

The following diagram shows the layout of the Beplay remote control buttons and the action assigned by default to each of these buttons.

 

Ref. Command Function
1. F1-8

Used to select and deselect the corresponding camera feeds in the Mosaic. F1 to F8 will allow you to select camera feeds 1 to 8. SHIFT + F1 to F8 will allow you to select camera feeds 9 to 16.

 

If enabled in the Global settings of the Client application, they are also used to enter a pre-defined text as a label for an event.

2. Operational Block 1  
  EVENTS Used in combination with the jog dial to browse between events.
  SLOMO Used in combination with the jog dial to replay camera feeds in slow motion.
  JOG Used in combination with the jog dial to browse the camera feeds frame by frame.
3. Jog Dial

The jog dial allows the operator to switch to Browsing mode.

 

Used in Offside Line mode to move the virtual offside line left or right.

4. Operational Block 2  
  Home Used to return to the Mosaic home layout.
 
NEXT PRESET MAIN Switches to another preset on the main screen.
 
NEXT PRESET 2ND Switches to another preset on the secondary screen.
  Take

Used to place the current camera selection into the new layout on the secondary screen.

 

SHIFT + Take will allow you to place the current camera selection into the new layout on the main screen.

5. Operational Block 3  
  Mark

Used to create a single TC event.

 

SHIFT + Mark will allow you to create a live event.

  Delete Event Used to delete an event.
  IN Used to mark the In point of a TC IN/TC OUT event.
  OUT Used to mark the Out point of a TC IN/TC OUT event.
  Save Used to save a single TC event, or the In or Out point of a TC In/TC Out event.
  PLAY/PAUSE

Initiates/pauses playback.

 

SHIFT + Play will allow you to play back the camera feeds at 33% of the standard speed.
  Last Event

Used to navigate to the event with the TC (or TC IN) just before the current TC.

 

SHIFT + Last Event will allow you to browse to the last event while keeping the current camera selection.

  PREV CAM Used to move to the previous camera feed.
  NEXT CAM Used  to move to the next camera feed.
  Live

Used to return to Live mode (= head of the record train) and the Mosaic home layout.

 

SHIFT + Live will allow you to return to Live mode while keeping the current camera selection.

6.
BACK Used to return to the previous Mosaic layout on the main screen.

 

SHIFT

Used in combination with:

the F keys to select cameras 9 to 16 or to enter a pre-defined text as a label for an event.

 

the Play button to play at 33% of the standard speed.

 

the JOG button to enter Fast Jog mode.

 

the BACK button to return to the previous Mosaic layout on the secondary screen.

 

the Mark button to create a live event.

 

the Take button to place the current camera selection into the new layout on the main screen.

 

the Live button to return to Live mode while keeping the current camera selection.

 

the Last Event button to browse to the last event while keeping the current camera selection.